• info@radluxtec.com
  • +91 98806 60032
Call Us Now: +91 98806 60032

DMX Decoder

Overview

With advanced micro controller technology, this decoder can convert the widely used DMX512/1990 signal to analogue 0 to 10V DC signal to drive analogue controlled LED drivers, fluorescents, dimmers, translates in TV studios etc. DMX address and manual control can be set easily with soft keys and display. In manual mode each channel intensity can be set and stored as a preset. The stored preset can be recalled back whenever necessary making it very useful in situations where DMX signal failure or console is not available. On board operating instructions provided makes this device very convenient and one need not have to search for operating manual. DMX input is through industry standard 5 pin XLR and outputs are through BNC plugs. The ezquipment has been designed to fix almost anywhere. Fix it to wall, floor, ceiling, front flush or square/round tubes up to 50 mm.

Features

  • Full digital control with DMX & MANUAL modes.
  • Soft push buttons for setting DMX address or intensity.
  • Digital display can show DMX address and intensity.
  • Manualpreset enables to use the decoder without console.
  • Onboarddmx termination.
  • Onboard operating instructions.
  • Universal input supply.
  • Extremely low power consumption.
  • Highly flexible mounting options.

Default mounting positions

Optional Bar-mount Kit

Technical Data

  • Power Input :90V-265V AC 60/50Hz
  • Power consumption :7 Watts Max
  • Dimming Protocol :DMX512/1990
  • Control Output :Through BNC, 0 - 10V DC 20mA/ch
  • Input Plug :3 pin IEC
  • Convenience :Display with soft keys
  • Weight :1 Kg
  • Dimension :500(L) mm x 62(H) mm x 95(D) mm